Home/Products/PCAP & Touch/10.5″
Reference drawing
10.5-inch G+G PCAP reference panel
Landscape panel with an FPC tail for an external controller board. Cover viewing area, outline and sensor outline below are from the reference drawing on the products page. The reference engineering configuration uses USB; board and host interface are confirmed with the stack. Cover finish, touch tuning and bonding stay open until the display, bezel and board are named. Diagonal sits slightly above a ≤10.1″ marketing emphasis—keep this page labelled photographed / reference, not a silent core-SKU expansion.
Size: 10.5″Route: Reference sampleBand: 7–16″
- Product category
- Projected capacitive touch panel
- Reference size
- 10.5 inches
- Structure
- G+G
- Cover viewing area (VA)
- 222.65 × 148.63 mm
- Cover outline (OD)
- 230.71 × 164.21 mm
- Sensor outline
- 230.31 × 159.07 mm
- Touch-panel thickness
- 1.30 ± 0.10 mm, touch panel only
- Cover thickness
- 0.70 mm
- Connection
- FPC tail · reference board TB62C · USB in reference engineering configuration · TX21 × RX36
- Touch points
- Multi-touch configuration confirmed for each project
- Operating / storage
- Confirmed for the selected cover, sensor, controller and assembly
- 2D / recognition drawing PDF
- Reference drawing figures on this page · full PDF on request
- Named LCD companion
- Confirmed per project
Interface notes
- Sensor connection: FPC for external touch-controller board (photo shows tail leaving glass).
- Reference board label TB62C; host interface USB in the reference engineering configuration only.
- Channels TX21 × RX36 — reference design.
Modify options
- Cover OD / print / holes → construction options + open risks
- FPC exit / length / connector → envelope match discussion
- Air vs optical bonding → stack check plan (process claims Pending until confirmed)
- Controller on-tail vs external board → confirm with host bus