Home/Products/PCAP & Touch/8.0″
Reference drawing
8.0-inch G+G PCAP reference panel
Portrait panel kept as a reference sample. The published mechanical figures below come from the reference drawing already shown on the products page. USB interface and a CHSC5468 controller appear on the sample tail. Cover, sensor and acceptance limits still follow the project drawing. The controller shown is the sample—not a promise that every 8.0-inch build uses the same IC. Custom cover printing, holes and bonding are reviewed with the display, not assumed from the photograph.
Size: 8.0″Route: Reference sampleBand: 7–16″
- Product category
- Projected capacitive touch panel
- Reference size
- 8.0 inches
- Structure
- G+G
- Cover viewing area (VA)
- 108.24 × 172.80 mm
- Cover outline (OD)
- 126.00 × 214.70 mm
- Sensor outline
- 116.20 × 184.70 mm
- Touch-panel thickness
- 1.85 ± 0.15 mm, touch panel only
- Cover thickness
- 1.10 mm
- Interface on the sample
- USB · CHSC5468 · TX32 × RX20
- Touch points
- Multi-touch configuration confirmed for each project
- Operating temperature
- −20°C to +60°C on the reference touch panel; assembly confirmed per project
- Storage temperature
- −30°C to +70°C on the reference touch panel; assembly confirmed per project
- 2D / recognition drawing PDF
- Reference drawing figures on this page · full PDF on request
- Optical / LCD pairing
- Confirmed per project (not on this touch-only reference sheet)
Interface notes
- Host bus on this sample: USB.
- Other buses (I²C, etc.): discuss — do not imply the photo guarantees them.
- Sensor channels TX32 × RX20 are reference-design figures.
Modify options
- Cover OD / print / holes → construction options + open risks
- FPC exit / length / connector → envelope match discussion
- Air vs optical bonding → stack check plan (process claims Pending until confirmed)
- Controller on-tail vs external board → confirm with host bus
Suggested brief hints: OD/VA or housing photo · gloves/water · host touch bus · bonding preference · qty band.