Home/Products/PCAP & Touch/15.6″
Engineering specification
15.6 Inch Industrial PCAP Touch Screen Panel
15.6″ industrial PCAP for OEM notebooks, HMI, kiosks and bonded display modules. Controllers are commonly matched from EETI / Ilitek families over USB / I2C after RFQ confirmation — not locked from a photograph. IP65 waterproofing and IK08 vandal resistance are available / configurable per project for the finished equipment envelope; they are not claimed as a factory-certified mark on every shipped bare panel. Cover OD, VA, bonding (OCA / LOCA) and acceptance limits stay confirmed per project.
- Product category
- Projected capacitive touch panel
- Screen Size
- 15.6 inches
- Structure
- PCAP G+G / G+F discuss
- Window-match note
- 1920×1080 window-match note (discuss)
- Cover viewing area (VA)
- Confirmed per project
- Cover outline (OD)
- Confirmed per project
- Sensor outline
- Confirmed per project
- Touch-panel thickness
- Confirmed per project
- Interface
- I²C / USB discuss — not assumed from the photograph
- Touch points
- Multi-touch configuration confirmed for each project
- 2D / recognition drawing PDF
- Full PDF on request
| Specification | Value |
|---|---|
| Display Size | 15.6 inches |
| Touch Technology | PCAP Multi-touch 10 Points |
| Structure | Glass+Glass G+G |
| Controller IC | EETI / Ilitek |
| Interface | USB / I2C |
| Surface Treatment | AG / AR / AF |
| Optical Bonding | OCA / LOCA |
Controller family, structure (G+G / G+F), surface treatment, and optical bonding are matched per RFQ — values above are searchable capability terms, not a frozen BOM for every build.
Industrial 15.6″ PCAP & bonded module inquire
15.6″ is a high-frequency notebook and industrial monitor diagonal. Window-match notes such as 1920×1080 are discussion aids only until the host panel is named. Bring OD / VA, mounting, glove or wet expectations, controller preference, and whether the RFQ needs a touch-only panel or an optically bonded LCD module.
Mechanical millimetres, channel count, and controller remain Confirmed per project. Photographed evidence is not upgraded into a public millimetre table on this page.
Optical Bonding & Sunlight Readable Display Integration
Air bonding and optical bonding (OCA / LOCA) are available for OEM stacks. Outdoor / high-ambient readability is engineered per project with the chosen cell, cover treatments (AG / AR / AF), and bonding path — not claimed as a single SKU brightness number on this page.
Water Rejection & Glove Touch Support
Glove touch and water-rejection tuning are discussed against cover thickness, ground design, and controller firmware. Ingress targets such as IP65 sealing and IK impact ratings are available / configurable per project for the finished equipment envelope — not every panel ships with a certified IP/IK mark by default.
Modify options
- Cover OD / print / holes → construction options + open risks
- FPC exit / length / connector → envelope match discussion
- Air vs optical bonding → stack check plan (process claims Pending until confirmed)
- Controller on-tail vs external board → confirm with host bus
Discuss this 15.6″ panel Back to PCAP line
Gallery overview for this diagonal. Not a public webshop SKU. Mechanical millimetre figures are confirmed per project.